Large Cool Incubator ILD / ILD-C series
country of origin : Japan
These incubators can store large amount of culture media or objectsat a time.
And the operation panel is located top for space-saving and easy to use.
● Highly precise temperature control
The 3digits digital PID controller with platinum sensor provides highly precise ±0.1 control operation.
● Highly precise temperature distribution
Double doors seal up structure
The inner doors are tempered glass with stainless frame seal up.
Together with the front doors, these realize double closing system for high temperature distribution accuracy.
Easy to observe inside when the front doors opened and this structure avoid thermal shock to objects
in the chamber.
● Forced convection・・・ILD series
ILD series is kept precise temperature distribution by forced air circulating in the chamber through heater
and cooling unit by forced fan installed inside the celling..
● Natural gravity convection・・・ILD-C series
ILD-C series is kept precise distribution by gravity convection (no wind) in the chamber. Temperature is
controlled through the cool-warm air jacket between chamber and heat-keeping board inside the exterior
panel. The objects (culture media) are prevented from contamination and drying.
Over heat preventive device is preset at chamber temperature 55℃
and independent over heat preventor (double). When operate, heating circuit is cut off with warning.
Breaker for Slight leakage and over current is provided.
Fixed time cultivation→Fixed time preservation→Cultivation
Above program is easy to set. (Maximum 8 steps, repeat 2～9999 times and unlimited)
The service port(φ46)is installed left side or back side. Sensor cables can be set through the hole.
Wide to use chamber without center pillar
The center part of both doors do not have center pillar.
The load of large samples can be easy to set through frontage. The center pillar type is available (option).